The TCS-S series luggage scale is a special-purpose weighing instrument. It has been specially designed to be a set of universal platforms that can perform luggage boarding functions for the aviation industry. The device sets the standard for what a baggage weighing instrument should contain and can truly be used in a "fully integrated" boarding system.
| Operator Panel | Features | Specifications |
| Display | High resolution, high contrast, support Chinese and English interface switching; At the same time, it shows: the weight of the passenger's travel bag, the total weight and total quantity of the travel bag, and the stable state of the weighing platform. | |
| Control output | 4 switching values common source output, maximum output current 200mA; The output port is internally equipped with over-current and over-heat protection; Support abnormal output such as qualified weight, upper overshoot and lower overshoot. | |
| Weighing function | The transmission frequency range of the display screen is 1-100 times/second; Start-up reset range: 0%-20% settable; Key reset range: 0%-20% can be set. | |
| Control Input | 4 switching value common source input, input port high level effective; Support hand/automatic, photoelectric signal access. | |
| Communication interface | 1x RS232 interface, 1x RS485 interface, MODBUS TCP (customizable) | |
| Weighter full load | Max.:150kg | |
| Graduation value | Can be selected in 0.0001,0.0002,0.0005,0.001,0.002,0.005,0.01,0.02, 0.05,0.1,0.2,0.5,1,2,5. | |
| Sensor | DC 5V,150mA,6-wire sensor interface, can drive 4 350Ω sensors | |
| Minimum Identifiable Signal | 0.5 μV | |
| A/D conversion speed | More than 300 times/second | |
| Auto Zero Tracking Range | 1-14 scale value zero tracking | |
| Raise an alarm | Ultra-light and overweight output port alarm; 2 bytes of abnormal information alarm in the weight sending protocol. | |
| Power input | 18-36V DC power input with power filter | |
| Power | 6W | |
| shell | Plastic panel and back shell, shell color is industrial gray; screen size: 160mm x 130mm | |
| Temperature coefficient | 2ppm/C non-linearity: 0.005% | |
| Operating temperature | -10°C to 40°C (14 °F to 104 °F) | |
| Operating humidity | 90% R.H No condensation | |
| Passenger Panel Interface | Serial interface, RJ11 | |
| PASSENGER PANEL | Features | Specifications |
| Display | High-intensity 7-chip LEDs, divided into three rows, display 6, 6 and 3 digits respectively; at the same time display the real-time weight of the passenger's bag, the total weight of the bag and the total number of bags. | |
| shell | Stainless steel panel, anti-scratch display mirror. Plastic back panel, fitting options for airport requirements; screen size: 122 mmx86mm. | |
| Operating temperature | -10°C to 40°C (14 °F to 104 °F) | |
| Power supply | Features | Specifications |
| Power input | 90-264VAC,47-63Hz (actual power consumption depends on installation) | |
| Power output | 24V DC | |
| Typical Dimensions | 110mmx58mmx32mm | |
| Authentication | UL, CE Marking | |
| Weigher base | Features | Specifications |
| Compatibility | Compatible with all ZEMIC TCS-S series weighing instrument bases, including static weighing instruments and conveyor weighing instruments, and compatible with most other weighing instrument bases with single, two and four load cells. | |
