The traditional red LED photoelectric sensor can only detect the intensity difference of light and can only receive light in the red wavelength range. The FW series uses a white LED light source with full spectral analysis capability, which can receive all wavelength ranges of visible light and can be detected according to the appearance color of the detected object, so that subtle color differences can be accurately detected.
The OLED screen display provides an intuitive and easy-to-use interface data display, which is convenient for users to view the test results at any time.
Receives all visible wavelengths for precise detection of subtle color differences
| Types | Double spot type | Standard type | Fiber Optic Type | |||
| Model | I/O | FW-D70D | FW-D70 | FW-D150 | FW-D500 | FW-DF10 |
| 1/O RS485 | FW-D70D-485 | FW-D70-485 | FW-D150-485 | FW-D500-485 | FW-DF10-485 | |
| Detection distance | 30 to 70 mm | 30 to 70 mm | 70 to 150 mm | 150 to 500 mm | ||
| Minimum spot diameter | 50mm, about 2x4mm | 50mm, about 7mm | 100mm, about 4.5mm | 250mm, about 11mm 500mm, about 20mm | Vends depending on the connected fiber optic components | |
| Response time | 200us/1ms/5ms/10ms/20ms/100ms/500ms | |||||
| Light source | White LED | |||||
| Reduce mutual interference function | Different frequency setting up to 2 sets | |||||
| Timer | OFF/ON-Delay/OFF-Delay/Single Delay | |||||
| Power supply | Power supply voltage | 12~24V DC ± 10% pulsation P-P below 10% | ||||
| Current consumption | Under 76mA at 24V DC Below 148mA at 12V DC | 24V DC, below 57mA 12V DC, below 108mA | At 24VDC, below 50mA Below 90mA at 12V DC | |||
| I/O | Control output | Dual output, each channel can be set separately NPN/PNP, NO/NC | ||||
| External input | Sensitivity setting/light stop switching mode short circuit current NPN: below 1mA/PNP: below 2mA | |||||
| RS-485 Communication Specifications | Support registration color ID function, direct output color ID, support up to 16 different color ID | |||||
| Protection circuit | Power supply reverse connection protection, power surge protection, output overcurrent protection, output surge protection, output reverse connection protection | |||||
| Environmental resistance | Enclosure protection level | IP64(IEC60529) | IP65(IEC60529) | |||
| Ambient lighting | Incandescent lamp: below 10000 Ix sunlight: below 20000 lx | |||||
| Ambient temperature | -20~50°C (no freezing) | -20~45°C (no freezing) | ||||
| Relative humidity | 35 ~ 85% RH (no condensation) | |||||
| Impact resistance | 1000 m/s2X, Y, Z direction each 6 times | |||||
| Vibration resistance | 10~55Hz two-way amplitude 1.5mm XY, Z direction 2 hours each | |||||
| Material | Shell: zinc casting (nickel-chrome) indicator cover: PC, button: silicone Light spot adjustment dial: SUS304 Lens cover: Glass cable sleeve and cable: PVC | |||||
