| Model | Types | M12 Non-flush | M18 flush | M18 Non-flush | M30 flush | M30 Non-flush |
| Two-wire DC | HX-1208-D1 (normally open) | HT-1805-D1 (normally open) | HX-1808-D1 (normally open) | HT-3010-D1 (normally open) | HX-3015-D1 (normally open) |
| HX-1208-D2 (normally closed) | HT-1805-D2 (normally closed) | HX-1808-D2 (normally closed) | HT-3010-D2 (normally closed) | HX-3015-D2 (normally closed) |
| Two-wire AC | HX-1208-A1 (normally open) | HT-1805-A1 (normally open) | HX-1808-A1 (normally open) | HT-3010-A1 (normally open) | HX-3015-A1 (normally open) |
| HX-1208-A2 (normally closed) | HT-1805-A2 (normally closed) | HX-1808-A2 (normally closed) | HT-3010-A2 (normally closed) | HX-3015-A2 (normally closed) |
| AC and DC | HX-1208-AD1 (normally open) | HT-1805-AD1 (normally open) | HX-1808-AD1 (normally open) | HT-3010-AD1 (normally open) | HX-3015-AD1 (normally open) |
| HX-1208-AD2 (normally closed) | HT-1805-AD2 (normally closed) | HX-1808-AD2 (normally closed) | HT-3010-AD2 (normally closed) | HX-3015-AD2 (normally closed) |
| Appearance |  |  |  |  |  |
| Detection surface | Front detection | Front detection | Front detection | Front detection | Front detection |
| Detection distance | 8mm±10% | 5mm±10% | 8mm±10% | 10mm±10% | 15mm±10% |
| Detecting objects | magnetic metal |
| Standard detection object (iron) | 12x12x1mm | 18x18x1mm | 18x18x1mm | 30x30x1mm | 30x30x1mm |
| Set distance | 0-6.4mm | 0-4.0mm | 0-6.4mm | 0-8.0mm | 0-12.0mm |
| Differential distance | Less than 10% of the detection distance |
| Response frequency | 400HZ | 400HZ | 400HZ | 300HZ | 300HZ |
| Wire diameter | 3.8mm | 4.8mm | 4.8mm | 4.8mm | 4.8mm |
| Power supply voltage | DC12-24V ripple (p-p) below 10% (DC10-30V) |
| Leakage current | Below 0.03mA |
| action form | NO: normally open, NC: normally closed |
| Control output | Load current below 200mA (residual constant voltage below 1V) |
| Show lamp | Action indicator light (red) |
| Protection circuit | Surge protection circuit, short circuit protection, reverse polarity protection |
| Ambient temperature | Action:-25- 70 ℃ (no ice, no condensation) |
| Environmental humidity | During operation and storage: 35-95% RH (no condensation) |
| The influence of temperature | The temperature range is -25-70 ℃, and the detection distance shall change within ± 10% when the temperature changes by 20 ℃. |
| Effect of voltage | When the rated power supply voltage fluctuates within ± 15%, the detection distance changes within ± 1% |
| Insulation impedance | Above 50MΩ (DC500 megohmmeter) between charging part and shell |
| Withstand voltage | AC1000V 50/60Hz 1min charging unit and shell |
| Vibration resistance | 10~55Hz up and down amplitude 1.5 mmX, Y, Z direction 2h |
| Impact-resistant | 500m/SX, Y, Z each direction 10 times |
| Connection method | Wire lead-out type (standard wire length 2m), special (PUR can be customized) drag chain cable |
| Shell material | Brass with nickel plating |
| Protection rating | Ip67 |
